Sales & Support: Request A Quote
Home News

High temperature paint construction process

Good quality Pre-engineered Modular Bridging for sales
Good quality Pre-engineered Modular Bridging for sales
I'm Online Chat Now
Company News
High temperature paint construction process

1. Before the construction, the metal surface should be degreased, derusted and treated to improve the adhesion of the paint film. The surface moisture of the metal should be 3 °C above the dew point during construction.

2. Stir the paint evenly before use, and use conventional methods such as brushing and spraying.

3. When spraying, it is necessary to use high-temperature special thinner, the dilution amount is 5-15% (based on the weight of the paint), the nozzle diameter is 1.5-2.0mm, and the air pressure is 0.3-0.4MPa.

4. It is recommended to brush or spray 1-2 steps.

 

Summary: Through the introduction of the performance characteristics of high temperature paint and high temperature paint construction process, it can be seen that high temperature paint has excellent high temperature resistance, resistance to cold and heat, chemical gas corrosion, weathering resistance, water resistance and electrical insulation.

Pub Time : 2019-07-12 15:24:27 >> News list
Contact Details
Jiangsu Jiuzhou Bridge Engineering Co.,Ltd.

Contact Person: Mr. Tomy.Gao

Tel: 86-571-87688170

Fax: 86-571-56379287

Send your inquiry directly to us (0 / 3000)